Advantek Networks (USB 2.0) Manuale Utente Scaricare il pdf (Pagina 72)

PCM-9584 User Manual 62

Appendix A Prog. GPIO & W’dog Timer

A.1 Supported GPIO Register

Below are detailed descriptions of the GPIO addresses and programming

sample.

A.1.1 GPIO Registers

CRF0 (GP10-GP17 I/O selection register. Default 0xFF)

When set to a '1', respective GPIO port is programmed as an input port.

When set to a '0', respective GPIO port is programmed as an output port.

CRF1 (GP10-GP17 data register. Default 0x00)

If a port is programmed to be an output port, then its respective bit can be

read/written.

If a port is programmed to be an input port, then its respective bit can

only be read.

CRF2 (GP10-GP17 inversion register. Default 0x00)

When set to a '1', the incoming/outgoing port value is inverted.

When set to a '0', the incoming/outgoing port value is the same as in data

Extended Function Index Registers (EFIRs)

The EFIRs are write-only registers with port address 2Eh or 4Eh on PC/

AT systems.

Extended Function Data Registers (EFDRs)

the EFDRs are read/write registers with port address 2Fh or 4Fh on PC/

AT systems.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 117 118

Nessun commento

Advantek Networks (USB 2.0) Manuale Utente Pagina 72